題-2_20190722105203370.png){kind=logo}
LPC-0513環保、中性清洗劑產品
發布時間：2019-07-16
新聞來源： 本站
瀏覽量：
次
LPC-0513環保、中性清洗劑
本品針對各類石油、化工裝置及工業機加工時在生產過程中生成的水垢和銹垢，具有優良的清洗效果，使用安全可靠；比傳統的清洗更安全、環保、經濟和實用。獲得國家一等發明獎。
對碳鋼、不銹鋼、黃銅、紫銅和鋁等材質的腐蝕率<0.3g/㎡·h以下, 對以上材質器件清洗過程中腐蝕遠遠低于HG/T2387-2007《工業設備化學清洗質量標準》腐蝕率≤6g/㎡·h的指標。
使用本品清洗后可以不需中和、漂洗、水沖洗，直接鈍化處理，可在被清洗得設備表面形成保護膜。使用本品安全可靠，對人體無毒無害，廢液排放不需中和處理，對環境沒有污染。
使用本品不僅省水、省電、省工、省時，而且節約、環保、高效、安全的清洗產品。
物理性能：外觀為白色固體粉末，水易容、無沉淀；水溶后PH值6.0~6.5，本品無毒、無味、無腐蝕、不燃不爆，不含無機酸和有機酸，能有效清除設備中沉積的水垢和銹垢；碳鋼軋制鱗片、鐵銹螯合反應除去。
本品使用溫度：常溫或加熱使用；
本品適用性：
適用于石油、化工生產裝置在線清洗；
開車前化學清洗（脫脂、清洗除銹）。
適用于民用及食品行業的裝置化學清洗；
適用于中央空調的清洗；
使用軋鋼制品的清洗及模具除銹清洗；
各種水垢、銹垢以及各種材質設備、管道、器件的化學清洗除垢。
LPC-0513 中性清洗劑操作方法
清洗前，需要確定具體的清洗目標和過程參數。
根據需求確定工件清洗要求；根據工件銹蝕污垢及污垢厚度確定本品所需濃度和清洗時間。
常溫清洗：將LPC-0513配制水溶液濃度為5~8%，清洗浸泡或循環時間24~48小時；
加熱清洗： 將LPC-0513配制水溶液濃度為3~5%，加溫50~90℃（50℃以上除垢效果更佳），清洗浸泡或循環需8~6小時；上述清洗具體時間按實際情況確定。
清洗后處理：用氮氣吹干或清洗后直接調PH值為8加入鈍化劑鈍化；或鐵離子濃度過高置換后用本品漂洗后調PH值鈍化。
注意：
使用本品循環或浸泡清洗時：當除垢較厚時若一次清洗不徹底的設備，可按3~5%的濃度補加或重新配置LPC-0513清洗劑，再繼續清洗，化學清洗時，在設備上部要開啟排氣孔充滿即可。
塑料編制袋或紙袋包裝：凈重25kg/袋，室內保存，有效期二年《聯系電話：13974961586》
ZL C-0513 PH Neutral Cleaning Agent ZHONGLAN Cleaning
Environment conservative and PH Neutral Cleaning Agent LPC-0513
This product is applied in all scale and rust from the petroleum and chemical equipment and industrial machining on the running process. This product has good cleaning effect and is reliable in safety, more safe, more environment protective, more economic, and more practical. Besides, it has earned National Award of technological Invention.
the rate of corrosion of carbon steel, stainless steel, yellow metal, copper and aluminum alloy is less than 0.3g/㎡·h according to the corrosion trial with this product，since the standard rate of corrosion of above-mentioned metal materials is ≤6g/㎡·h according to HG/T2387-2007,“The quality standard of chemical cleaning of industrial equipment”.
The protective film can be easily made on the surface of metal materials with this product and it is not necessary to neutralize and rinse with water before deactivation. It’s safe, non-poisonous, no pollution to the environment since the wasted water can be discharged directly without neutralized treatment after cleaning process.
The expense of water, power, man-power, time in the running process can be saved, And it is economic, environmental conservative, efficient, safe product for cleaning metal materials.
Physical Property: It appearance is white solid powder, and it is soluble in water,
Without precipitation, also the PH value of its water solvent is 6.0~6.5. It is Non-poisonous, tasteless, no corrosion, no combustion and explosion, it has no content of inorganic acid and organic acid, effectively not only cleaning scale and rust on the surface or equipment, but also removing carbon steel scale and rust by chelating reaction.
Temperature in application: it can be used under the normal temperature or heating circumstance.
Applicability:
Online clean for the petroleum and chemical devices;
The chemical cleaning when start-run (degreasing, rust cleaning);
Civilian and food service industry devices;
Central air-condition;
Rolled steel products and mould;
All scale, rust on the surface of all devices, pipes or chemical equipments.
Instruction of LPC-0513 PH neutral cleaning detergent
The clean- process parameters should be decided before clean-work start.
The cleanness requirement of the objects; according to the thickness of the rust or scale on the surface of objects, the concentration of the cleaning detergent solvent and clean-time should be decide。
Clean in normal temperature: the concentration of LPC-0513 water solvent should be in 5~8%(wt%), cleaning time is 24~48 hours.
Heating cleaning: the 3~5%（wt%）concentration of LPC-0513 in water is heated to 50-90℃, and cleaning time is 8-6 hours. The specific time is based on the actual situation.
After-treatment: After cleaning by water or nitrogen gas ,PH value of the solvent should be adjust to 8 before adding the deactivation detergent;
Notice：
When cleaning: 3~5% content ofLPC-0513 water solvent should be set up again if the effect of the original clean is not good because of the thickness of scale or rust. Make sure that the vessel should be full of the solvent by open the vent value when cleaning.
Plastic package or paper package: net weight 25kg/package, Indoor preservation, 2 years of period of validity.
Contact Tel: 13974961586
本品針對各類石油、化工裝置及工業機加工時在生產過程中生成的水垢和銹垢，具有優良的清洗效果，使用安全可靠；比傳統的清洗更安全、環保、經濟和實用。獲得國家一等發明獎。
對碳鋼、不銹鋼、黃銅、紫銅和鋁等材質的腐蝕率<0.3g/㎡·h以下, 對以上材質器件清洗過程中腐蝕遠遠低于HG/T2387-2007《工業設備化學清洗質量標準》腐蝕率≤6g/㎡·h的指標。
使用本品清洗后可以不需中和、漂洗、水沖洗，直接鈍化處理，可在被清洗得設備表面形成保護膜。使用本品安全可靠，對人體無毒無害，廢液排放不需中和處理，對環境沒有污染。
使用本品不僅省水、省電、省工、省時，而且節約、環保、高效、安全的清洗產品。
物理性能：外觀為白色固體粉末，水易容、無沉淀；水溶后PH值6.0~6.5，本品無毒、無味、無腐蝕、不燃不爆，不含無機酸和有機酸，能有效清除設備中沉積的水垢和銹垢；碳鋼軋制鱗片、鐵銹螯合反應除去。
本品使用溫度：常溫或加熱使用；
本品適用性：
適用于石油、化工生產裝置在線清洗；
開車前化學清洗（脫脂、清洗除銹）。
適用于民用及食品行業的裝置化學清洗；
適用于中央空調的清洗；
使用軋鋼制品的清洗及模具除銹清洗；
各種水垢、銹垢以及各種材質設備、管道、器件的化學清洗除垢。
LPC-0513 中性清洗劑操作方法
清洗前，需要確定具體的清洗目標和過程參數。
根據需求確定工件清洗要求；根據工件銹蝕污垢及污垢厚度確定本品所需濃度和清洗時間。
常溫清洗：將LPC-0513配制水溶液濃度為5~8%，清洗浸泡或循環時間24~48小時；
加熱清洗： 將LPC-0513配制水溶液濃度為3~5%，加溫50~90℃（50℃以上除垢效果更佳），清洗浸泡或循環需8~6小時；上述清洗具體時間按實際情況確定。
清洗后處理：用氮氣吹干或清洗后直接調PH值為8加入鈍化劑鈍化；或鐵離子濃度過高置換后用本品漂洗后調PH值鈍化。
注意：
使用本品循環或浸泡清洗時：當除垢較厚時若一次清洗不徹底的設備，可按3~5%的濃度補加或重新配置LPC-0513清洗劑，再繼續清洗，化學清洗時，在設備上部要開啟排氣孔充滿即可。
塑料編制袋或紙袋包裝：凈重25kg/袋，室內保存，有效期二年《聯系電話：13974961586》
ZL C-0513 PH Neutral Cleaning Agent ZHONGLAN Cleaning
Environment conservative and PH Neutral Cleaning Agent LPC-0513
This product is applied in all scale and rust from the petroleum and chemical equipment and industrial machining on the running process. This product has good cleaning effect and is reliable in safety, more safe, more environment protective, more economic, and more practical. Besides, it has earned National Award of technological Invention.
the rate of corrosion of carbon steel, stainless steel, yellow metal, copper and aluminum alloy is less than 0.3g/㎡·h according to the corrosion trial with this product，since the standard rate of corrosion of above-mentioned metal materials is ≤6g/㎡·h according to HG/T2387-2007,“The quality standard of chemical cleaning of industrial equipment”.
The protective film can be easily made on the surface of metal materials with this product and it is not necessary to neutralize and rinse with water before deactivation. It’s safe, non-poisonous, no pollution to the environment since the wasted water can be discharged directly without neutralized treatment after cleaning process.
The expense of water, power, man-power, time in the running process can be saved, And it is economic, environmental conservative, efficient, safe product for cleaning metal materials.
Physical Property: It appearance is white solid powder, and it is soluble in water,
Without precipitation, also the PH value of its water solvent is 6.0~6.5. It is Non-poisonous, tasteless, no corrosion, no combustion and explosion, it has no content of inorganic acid and organic acid, effectively not only cleaning scale and rust on the surface or equipment, but also removing carbon steel scale and rust by chelating reaction.
Temperature in application: it can be used under the normal temperature or heating circumstance.
Applicability:
Online clean for the petroleum and chemical devices;
The chemical cleaning when start-run (degreasing, rust cleaning);
Civilian and food service industry devices;
Central air-condition;
Rolled steel products and mould;
All scale, rust on the surface of all devices, pipes or chemical equipments.
Instruction of LPC-0513 PH neutral cleaning detergent
The clean- process parameters should be decided before clean-work start.
The cleanness requirement of the objects; according to the thickness of the rust or scale on the surface of objects, the concentration of the cleaning detergent solvent and clean-time should be decide。
Clean in normal temperature: the concentration of LPC-0513 water solvent should be in 5~8%(wt%), cleaning time is 24~48 hours.
Heating cleaning: the 3~5%（wt%）concentration of LPC-0513 in water is heated to 50-90℃, and cleaning time is 8-6 hours. The specific time is based on the actual situation.
After-treatment: After cleaning by water or nitrogen gas ,PH value of the solvent should be adjust to 8 before adding the deactivation detergent;
Notice：
When cleaning: 3~5% content ofLPC-0513 water solvent should be set up again if the effect of the original clean is not good because of the thickness of scale or rust. Make sure that the vessel should be full of the solvent by open the vent value when cleaning.
Plastic package or paper package: net weight 25kg/package, Indoor preservation, 2 years of period of validity.
Contact Tel: 13974961586
分享到：
